80 Series Single Strand Chain for Stack Turner

Order by the foot in 10-foot increments

Part Number: 24-1019-0052

1 1/2″ 2 Hole Flange

Part Number: 24-0321-0005

Kit to sanitize all tires & wheels

Part Number: 19-2099-0001

Ledwell Aluminum Catwalk

Built for Tough, Reliable Access

Designed with practicality in mind, our Aluminum Catwalks provide reliable access for Bulk Haul Feed Truck and Trailer applications. Constructed from high-strength aluminum with a Grip Strut surface, these catwalks offer unmatched durability and secure footing for feed trailers.

Ledwell Aluminum Catwalks are customizable to your needs. Sold by the foot, these walkways can be ordered to fit your bulk haul trucks and feed trailers. Two 20-foot pieces are needed to create a 19-inch-wide surface, perfect for a 40-foot trailer.

Aluminum Catwalk Specifications

Material: High-strength aluminum for lightweight durability
Width: 9.5 inches
Grip Surface: Grip Strut traction for enhanced safety in all weather conditions
Length: Sold by the foot; standard stock lengths are 20 feet. Custom cuts are available
Installation Tip:Two 20-foot pieces are needed to create a 19-inch-wide surface, perfect for a 40-foot trailer

Part Number: 82020A

Auger Discharge Boom Lift Cylinder

Part Number: L4L20

Bulk Feedbody Decal Kit – Paddle Wagon

Enhance safety and operational clarity with Ledwell’s Paddle Wagon Feedbody Decal Kits. These operational safety decals are designed for durability and straightforward application. Each decal is crafted from high-performance vinyl, built to withstand demanding environments, and last up to 8 years. The Paddle Wagon truck decal kit provides clear, professional signage to promote your feed truck’s safe and effective operation to keep your equipment compliant and operators informed.

This comprehensive kit includes essential decals to keep your equipment compliant and operators informed. The Ledwell Paddle Wagon Truck Decal Kit includes:

• 1 – Safety & Support Information
• 5 – Manual Control Labels
• 2 – Wear Eye Protection
• 1 – Watch for Overhead Power Lines
• 2 – Auger or Chain Caution
• 1 – Reverse Light
• 1 – Watch for Overhead Powerlines – Reversed
• 6 – Axles

Easy Safety Decal Application Process

Applying your auger chain truck decals is simple and effective. Check out our detailed How To Apply Ledwell Truck Decals Like a Pro guide for step-by-step instructions to ensure a flawless finish. With just a few common tools, such as scissors, a tape measure, and isopropyl alcohol, you’ll be equipped to apply your decals like a pro.

Part Number: 28-0199-0020

Part Number: 19-6005-0003

Manufactured to fit Ledwell Severe Duty Hydraulic Cooler

Hydraulic filters protect system components from damage by preventing contaminants from becoming trapped in small openings. A quality hydraulic filter keeps your system running efficiently and helps avoid costly repairs. Remember, the lower the micron rating, the finer the filtration—and the cleaner your hydraulic fluid stays.

Ledwell hydraulic filter elements keep fluids clean and systems protected. This 10-micron absolute glass filter is engineered to remove dirt and debris from liquids immediately, helping prevent premature wear and costly downtime in your hydraulic system.

Made with multi-layered, non-woven glass media, this filter delivers the highest levels of depth filtration efficiency and dirt-holding capacity. That means longer service life and fewer changeouts. Backed by a steel support mesh, it’s built to withstand higher differential pressures and keep performing under severe conditions.

Designed for durability and peak filtration performance, this element helps ensure your hydraulic equipment runs clean, smooth, and dependable.

Benefits of the Ledwell Hydraulic Filter

• Easy to install and use
• Removes dirt and debris from liquids
• Keeps fluids and systems clean
• High dirt-holding capacity extends service life
• Withstands high differential pressures for tough jobs

Fully interchangeable with any Ledwell Severe Duty Cooler

Part Number: 27-1484-0007

51-3/4 Flow Control Valve for Feedbody

Built for dependable control where it matters most, this hydraulic flow control valve helps operators dial in the exact feed rate needed at the discharge. Used on Ledwell Feed Trailers, this valve regulates hydraulic flow to maintain a steady, consistent output, giving crews better control over material placement and reducing waste.

Designed for tough, real‑world conditions, this flow control valve supports smooth operation under varying loads and jobsite demands. Simple to adjust and built to last, it plays a critical role in keeping feed moving at the right pace, every time. Like every component we stand behind, it reflects Ledwell’s commitment to quality, grit, and equipment that moves you forward.

Hydraulic Flow Control Valve Features & Benefits:

• Controls hydraulic flow to regulate feed discharge rate
• Supports consistent, repeatable material output
• Helps reduce overfeeding and material waste
• Built for durability in demanding operating conditions
• Proven component used on Ledwell Feed Trailers

Part Number: 27-0609-0002

Worm gear for stack turner assembly

Part Number: 19-0110-0009

Feedbody King Pin Assembly from Ledwell

This King Pin Plate is a standard full-size kingpin assembly designed for Ledwell feedbody trailers. It serves as the connection point between the feed trailer and the tractor’s fifth wheel, providing a secure and reliable coupling for safe transport.

Manufactured in-house by Ledwell, this kingpin plate is built for strength, consistency, and long-term durability. Be sure to specify the pin setting measurement when ordering to ensure proper fitment. We keep several pin setting options in stock and can build to your required measurement as needed.

Full Size Kingpin Plate Features

• Standard full-size kingpin for Ledwell feedbody trailers
• Built in-house for durability and precise fit
• Requires pin setting measurement when ordering
• Multiple pin settings available from stock
• Custom-built to your specified measurement if needed

Built to perform and made to fit, just like everything Ledwell makes.

Part Number: L814

All Position Hydraulic Motor for 9″ Feed Discharge

Part Number: 27-0201-0003

Discharge auger end shaft

Part Number: L118

1-1/4″ X 1 Idler shaft for horsehead and paddle boom discharge

Part Number: L195

Part Number: 60BS23R24K6

Destaco Clamp

Part Number: 24-1309-0002