Skip to main content
  • 3″ Victaulic Nipple

    Water Pump Outlet

    3″ VICT X 3″ NPT

    Part Number: L080261

  • 3/4″ Side Marker Light – Clear

    Clear 3/4″ LED marker light

    Part Number: 16-0119-0004

  • 3/4″ Side Marker Light – Red

    Red 3/4″ LED marker light

    Part Number: 16-0119-0003

  • 3/4″ Side Marker Light – Yellow

    Yellow 3/4″ LED marker light

    Part Number: 16-0119-0005

  • Air Acuator

    Plumbing diaphragm valve only

    2 1/2″ NPT with air actuator

    Part Number: 29-2903-0001

  • Air Switch

    Part Number: AV050

    3 button air valve

  • Air Switch

    Part Number: AV041

    2 Button Air Valve

  • Clamp – 3.5″

    3 1/2″ T-Bolt Clamp

    Part Number: 24-1307-0011

  • Clamp – 4.5″

    4 1/2″ T-Bolt Clamp

    Part Number: 24-1307-0015

  • Water Truck Decal Kit

    About the Ledwell Water Truck Safety Decal Kit

    Enhance safety and operational clarity with Ledwell’s Water Truck Decal Kit, designed for durability and straightforward application. Each decal is crafted from high-performance vinyl, built to withstand demanding environments and last up to 8 years. The water truck decal kit provides clear, professional signage to promote your water hybrid truck’s safe and effective operation to keep your equipment compliant and operators informed.

    This comprehensive kit includes essential decals to keep your equipment compliant and operators informed. The Ledwell Water Truck Decal Kit includes:

    • 1 – Safety & Support Information
    • 2 – Contents Non-Potable
    • 6 – Wear Eye Protection
    • 2 – Drain Primer
    • 1 – Tank Vehicle Endorsement Notice
    • 1 – Operation Instructions
    • 1 – Primer Valve Notice

    Easy Safety Decal Application Process

    Applying your water truck decals is simple and effective. Check out our detailed How To Apply Ledwell Truck Decals Like a Pro guide for step-by-step instructions to ensure a flawless finish. With just a few common tools, such as scissors, a tape measure, and isopropyl alcohol, you’ll be equipped to apply your decals like a pro.

    Part Number: 28-0199-0003

  • Diaphram

    Part Number: 8255704C

    Diaphram for 29-2903-0001 valve

  • Handle – Center Control

    Manual Control Handle – Center

    Part Number: 24-1030-0010

  • Handle – Left Control

    Manual Control Handle – Left

    Part Number: 24-1030-0009

  • Handle – Right Control

    Manual Control Handle – Right

    Part Number: 24-1030-0011

  • Handle Kit – 4″ Valve

    Handle Kit For 4″ Butterfly Valve

    Part Number: 24-1221-0005

  • Manifold – Water Truck

    Manifold for water truck pump inlet

    Part Number: L124001

  • Quick Connect – Side Spray Nozzle

    Side spray nozzle quick connect

    Part Number: 24-0702-0003

  • Side Spray Nozzle

    Nozzle for side spray

    Part Number: L080020

  • Spray Cap

    Cap for Spray Bar

    Part Number: 29-0103-0008

  • Spray Nozzle

    1-1/2″ Adjustable spray nozzle for hose

    Part Number: 29-2903-0002

  • Valve – Butterfly

    Part Number: 24-1221-0002

  • Victaulic Coupling – 2.5″

    2 1/2″ Victaulic coupling

    Part Number: 24-1302-0001

  • Victaulic Coupling – 3″

    3″ Victaulic coupling

    Part Number: 24-1302-0002

  • Water Cannon Kit

    Basic Water Cannon Kit

    Part Number: 29-2903-0005

  • CCW Pump

    Ledwell Counterclockwise Berkeley Water Pump
    When the job calls for a CCW setup, this pump gets it done without a fuss. Built tough with a heavy-duty shaft and no-nonsense parts, it’s made for real world conditions. You’ll appreciate the easy service access and the dependable performance that keeps downtime low.

    This water pump is built to work hard and keep going. With sealed bearings, there’s no need for greasing, which means less time spent on maintenance and fewer breakdowns in the field.

    The heavy-duty impeller shaft holds up under pressure and the slip-fit sleeve makes service quick and safe—no heating, no sticking, just in and out. The precision-cast iron impeller delivers reliable performance every time.

    Its smart design allows the casing to rotate every 45 degrees, so it fits wherever it’s needed. Even the stuffing box is easy to access, making repairs faster and simpler when the time comes.

    Key Features of the CCW Pump

    Heavy-Duty Bearing Frame: Matches standard frame sizes, but built tougher to extend bearing life and keep equipment running longer.
    Sealed Bearings: No greasing in the field. Seals keep out dirt and debris, cutting down on wear and tear.
    Upgraded Bearing Retention: Fewer service calls. This design holds strong with minimal upkeep.
    O-Ring Casing Seal: Better than a gasket. Easier to assemble and disassemble, and allows for smooth rotation when needed.
    1-1/4″ Keyed Impeller Shaft: Solid and reliable under pressure. Makes repairs easier and helps reduce the number of spare parts you need to keep on hand.
    416 Stainless Slip-Fit Shaft Sleeve: Installs fast without heat or special tools—no sticking, no galling, no downtime.
    Cast Iron Impellers: Precision-cast to ASTM specs for dependable performance and long service life.
    Rotatable Casing: Available in both CW and CCW models, with 45-degree rotation to fit tight spaces on most chassis.
    Packed Stuffing Box: Easy-to-reach two-piece glands on either side make service jobs quicker and cleaner.

    Part Number: 90-2901-0001

  • CW Water Pump

    Clockwise (CW) Water Pump for Trucks
    This CW water pump is built to handle hard work day in and day out. With solid construction and smart design, it moves water fast and keeps things running smooth. Sealed bearings mean less time on maintenance, and the rotatable casing lets you mount it how you need it. Whether you’re watering down a jobsite or filling tanks, it’s ready to go when you are.

    This hydraulic water pump for water trucks is built to work hard and keep going. With sealed bearings, there’s no need for greasing, which means less time spent on maintenance and fewer breakdowns in the field.

    The heavy-duty impeller shaft holds up under pressure and the slip-fit sleeve makes service quick and safe—no heating, no sticking, just in and out. The precision-cast iron impeller delivers reliable performance every time.

    Its smart design allows the casing to rotate every 45 degrees, so it fits wherever it’s needed. Even the stuffing box is easy to access, making repairs faster and simpler when the time comes.

    Key Features of the Hydraulic Water Pump for Water Trucks

    Heavy-Duty Bearing Frame: Matches standard frame sizes, but built tougher to extend bearing life and keep equipment running longer.
    Sealed Bearings: No greasing in the field. Seals keep out dirt and debris, cutting down on wear and tear.
    Upgraded Bearing Retention: Fewer service calls. This design holds strong with minimal upkeep.
    O-Ring Casing Seal: Better than a gasket. Easier to assemble and disassemble, and allows for smooth rotation when needed.
    1-1/4″ Keyed Impeller Shaft: Solid and reliable under pressure. Makes repairs easier and helps reduce the number of spare parts you need to keep on hand.
    416 Stainless Slip-Fit Shaft Sleeve: Installs fast without heat or special tools—no sticking, no galling, no downtime.
    Cast Iron Impellers: Precision-cast to ASTM specs for dependable performance and long service life.
    Rotatable Casing: Available in both CW and CCW models, with 45-degree rotation to fit tight spaces on most chassis.
    Packed Stuffing Box: Easy-to-reach two-piece glands on either side make service jobs quicker and cleaner.

    Part Number: 90-2901-0001

  • Water Truck Control Cable

    Water Truck Control Cable

    Length varies between front, side and rear spray valves.

    Part Number: 24-1030-0022