Wireless remotes are convenient for operating equipment from a distance without cumbersome cords or cables. Here, we will guide you on how to pair a wireless remote with a receiver.
Before we begin, it’s important to note that no other remotes should be operated in the vicinity during the dedication process to pair a wireless remote, as it can cause issues with the pairing. Additionally, the receivers can store two unique ID codes, allowing the use of two different wireless remotes.
Let’s get started with the following steps:
Step 1: Power up the receiver
To begin the pairing process, ensure the receiver mounted to the equipment is powered up and ready to receive signals.
Step 2: Locate the setup button
Next, find the green ‘SETUP’ button on the bottom of the receiver. The button should be easily identifiable and marked as ‘SETUP.’
Step 3: Press the setup button five times
Press the ‘SETUP’ button quickly, five times. The blue ‘POWER/ACTIVITY’ light will blink five times to confirm the correct process.
Step 4: Press the setup button once
Then, press the ‘SETUP’ button one more time. The ‘POWER/ACTIVITY’ light will blink once, indicating that the receiver is ready to receive a signal from the remote.
Step 5: Press any button on the remote
Press any button on the wireless remote that will be used with this receiver for at least two seconds. The ‘POWER/ ACTIVITY’ light on the receiver will blink approximately six times, indicating that the code has been learned. If the remote has an ON/OFF button, use the ON button in this step.
Step 6: Dedication process for second remote (optional)
If a second handheld remote requires dedication, proceed to step 7. If not, the dedication process is complete.
Step 7: Press the setup button five times again
Press the ‘SETUP’ button on the receiver five times quickly. The blue ‘POWER/ACTIVITY’ light will blink five times to confirm the correct entry.
Step 8: Press the setup button twice
Next, press the ‘SETUP’ button two more times. The ‘POWER/ ACTIVITY’ light will blink twice, indicating that the receiver is ready to receive a signal from the second wireless remote.
Step 9: Press any button on the second remote
Press any button on the second handheld remote that will be used with this receiver for at least two (2) seconds. The ‘POWER/ ACTIVITY’ light on the receiver will blink approximately six times, indicating that the code has been learned.
And that’s it! The dedication process to pair a wireless remote is complete, and the wireless remote should be paired with the receiver. Repeat the above steps if you need to pair another remote. If you encounter any issues with pairing, review our frequently asked questions or contact Ledwell for assistance.