Skip to main content
search
0

Fire Trucks

Fire Tanker Truck

Quick Response For Rural Fires

When it comes to rural fires, Ledwell Custom Fire Tankers are a crucial member of the team. Our tanks are designed to carry enough water to control most rural fires. They’re lined with a thick interior protective coating that prevents corrosion and extends the tank’s life. Fill your Ledwell Fire Tender through a top opening or a hose connected to a hydrant or reservoir. Multiple spray heads at the front, side, and rear provide maximum reach for your spray.

Other available features include lighting packages for night and emergency use, top-mounted remote control water cannon, hose or portable storage tank, and hose reels. All Ledwell Water Tank Fire Trucks for sale are built with the baffling setup required under NFPA 701 Tank Construction standards.

Ledwell Fire Trucks

Our Ledwell fire tanker is working great. Fires on the side of a highway are a breeze for us to handle.

Frank AppleberryTillar, Arkansas Volunteer Fire Department

Reltated Equipment

Rollbacks

Heavy-Duty Hauling Solutions.

Service Trucks

Delivery and maintenance trucks that are versatile and cost-effective.

Dump Trucks

A flexible solution for your material transportation needs.

Lube Buddy

Reduce service time by having your fuel and lube service directly on your worksite.

Fire Truck Resources

VIDEOS

WARRANTY

PARTS

FIRE TRUCK FAQS

PTO

What does PTO stand for?

PTO is short for power take-off.

How do I order a new PTO for my equipment?

We offer multiple PTO options. To ensure you order the correct size for your equipment, please contact our Parts Department.

Where are the extra fuses for the PTO stored?

If equipment is mounted on a truck, any extra fuses will be placed in the battery box.

How often should I inspect the PTO?

The PTO should be checked during the pre-operation inspection. Bolts on the PTO should be tightened monthly according to the Capscrew Marking and Torque Values Chart.

Water Trucks

How do you operate a water truck?

Learn to operate your Ledwell Water Truck correctly to extend the life of your equipment by following the steps below or watching this operation video.

Walk around the entire truck to perform a pre-trip inspection. Be sure to check the following: Wheels & tires, PTO for leaks, Driveline for connection, Pump bolts are tightened, and has slow drip at packing.

Primer Tank Valve to be closed if filling via fire hydrant or top fill

 

To fill tank: Fire Hydrant

Connect the hose with cam lock to fill the pipe at the rear of the tank.

Connect the other end of the hose to a fire hydrant.

Turn hydrant on to begin filling.

While filling the tank, beware of the Road Limit gauge at the tank’s front driver side.

 

To fill tank: Top Fill

Open manway lid at the top of the tank, if applicable.

Center opening of the tank with the opening of water source

 

To fill tank: Suction Hose

Close 4″ butterfly valve on the suction side of the pump.

Remove cam lock from suction pipe and attach fill hose.

Open the primer tank valve and allow water to fill the system.

Pull the bleeder valve to allow air to escape.

Engage PTO Set RPM to 1,800 – 2,000 to begin filling the tank.

Once the tank is full, Disengage PTO.

Shut primer tank valve.

Remove the fill hose and replace the camlock cap.

Open 4″ butterfly on suction.

 

To begin spraying:

Attach side spray, if desired Engage PTO and put the truck in gear.

Pull valves in the cab to activate nozzles – Front/Rear/Side.

Drive as needed to perform spray – being mindful of water movement in the tank

CAUTION: At high engine RPM, do not close all spray valves at once.

Disengage PTO

 

To spray via Hose Reel:

Engage PTO.

Manually open the gate valve at the rear passenger side of the tank.

Adjust nozzle as needed.

Disengage PTO

What should the output of my water truck be?

The pump on a Ledwell water tanker is set up to pump around 400GPM at 2000RPM engine speed with about 55PSI at the spray heads.

At this engine speed, you should receive a spray pattern of 55′ wide by 30′ deep and a side spray 65′ to 75’out.

Most PTOs are in the 111% to 126% range. The pump will peak at 2400-2500RPM (pump speed).

What size drive line does my water truck use?

Drive lines vary in length depending on the truck and water tank size.

Measure from the pump yoke’s tip to the PTO yoke’s tip. This measurement will be the most accurate for a new drive line.

How do I adjust the cables on my water truck?

The cables on a manual water truck stretch some initially after use. If leaking occurs at outlets, you might need to adjust the cables.

Follow these steps to adjust water truck cables:

Remove the clevis pin in the cable connection to the valve. Ensure that the valve is free of debris.

Close the valve completely with a wrench.

Shift in-cab handle to the closed position.

Adjust the cable housing using the two jam nuts on the mounting bracket until the pinhole in the clevis lines up with the hole in the valve lever.

Install the pin.

Check for closure by opening and closing. Fine-tune adjust as needed.

Can I haul and spray other liquids with my water truck?

Our tanks are lined with Lifelast coating to protect the tank from corrosion. This coating is tolerant of most chemicals with the exception of strong acids, aromatic hydrocarbons, ketones and chlorinated solvents. Always check the content before loading your tank with water mixed products.

The pump on my water truck is leaking. How do I fix that?

The pump is designed to leak in order to wet the packing and keep it cool. It should drip 40 to 60 drops a minute. It’s adjustable with the packing gland ring and the two threaded studs holding it. When all the adjustment is taken up, then it is time to replace the packing.

Close Menu